Moravia EV Charging Point Protection Guard Surface Fixed 500H mm

Designed to provide protection to Electic Vehicle charging ports from accidental damage. Manufactured from 60mm high quality steel, galvanised. Highly visible 75mm retro-reflective rings. Pre-drilled based, designed for surface mounting. 12 x 100mm rawl bolts & 12 x 120mm through bolt anchors required to fix to the surface, to be purchased separately. O/A Height: 500mmBase plate size: 160L x 70W mmWeight: 5.9kg

Moravia Plastic Water Filled Buddha Safety Barrier

Manufactured from high-density polyethylene for strength and durability. Plus 100% recyclable. Lightweight and easy to transport to different locations. Quick and easy to deploy. Simply fill with water to give barriers maximum stability. Can be clipped together to create a longer run. Two can be faced together over exposed holes and damaged manhole covers. A concave area can be used for spoil placement. Can be stacked when not in use. Designed with forklift entry. Supplied with reflective panel for high visibility. Reflective panel confirms to BSEN 12899-1. Red or White is Available. O/A Dims: 1040L x 800H x 280D mm Weight: 5.5kg empty 27.5kg when filled with water

Moravia Steel Right Angle Pallet Racking Protector

Ideal for use in logistic depots, warehouses, factories, manufacturing sites, storerooms and more. Manufactured from high quality steel with Yellow and Black powder coated finish. Use with PU absorption pad to absorb impact and protect floors from damage. Absorbent pad is also great to use with uneven floors to keep protector straight. Yields up to 45mm. Yield angle 6.5°. Quick and easy to install (using anchor bolt fixing kit (to be ordered separately). O/A Dims: 160 x 160 x 400H mm Weight: 8kg

Moravia Plastic Safety Barrier Board System

Ideal for cordoning off road works, excavation sites, building sites or creating walkways on public pathways. Manufactured from a high-density polyethylene for strength and durability. Fitted with reflective panels for high visibility. Simply hook together to create a longer run. Build your own system buy purchasing base, upright and planks to suit your requirements.

Moravia Plastic Pedestian Barrier 3 or 4 Gate

Manufactured from a high-density polyethylene for strength and durability. Lightweight and easy to transport to different locations. Features reflective panel for high visibility. Reflective panel confirms to BSEN 12899-1. 3 or 4 gate versions available. This barrier is fully approved by Openreach. O/A Dims: 2000L x 1100H x 50D mm Weight: 9.9kg

Moravia Plastic Crowd Control Barrier

Manufactured from a high-density polyethylene for strength and durability. Lightweight and easy to transport to different locations. Quick and easy to deploy, no problem for uneven ground. Feet swivel for compact storage. Can be hooked together to create a longer run. O/A Dims: 2000L x 50D x1100H mm Weight: 9.9kg

Moravia Black Bull Steel Corner Protection Guards

Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Protects stock, traffic routes and work areas, separates different traffic routes (e.g. stacker lanes in warehouses and pedestrian traffic), machinery, supports, columns, shelving, loading ramps and equipment. Easily installed, rawl plug bolts can be purchased separately: Protection Guards Rawl Plug Bolts (12 bolts required per guard). Shock Absorption Pad is available to add flexibility to your Protection Guards.

Moravia Black Bull Steel Hoop Protection Guards

Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Protects stock, traffic routes and work areas, separates different traffic routes (e.g. stacker lanes in warehouses and pedestrian traffic), machinery, supports, columns, shelving, loading ramps and equipment. Easily installed, rawl plug bolts can be purchased separately: Protection Guards Rawl Plug Bolts (8 bolts required per guard). Shock Absorption Pad is available to add flexibility to your Protection Guards.

Moravia Black Bull Warehouse Protection Guards with Steel Infill

Great for indoor use in warehouses, distribution depots, storage areas etc. Used to protect stock, machinery, columns, shelving, loading ramps and equipment. Also used to create traffic routes and separate working areas.-Steel construction with a powder coated finish in Yellow and Black for high visibility. Easy to install; simply use raw plug bolts to secure to the ground. (Bolts to be purchased separately, 8 required per guard.) Tube Dia.: 76mm Tube Thickness: 3mm

Moravia 6mm or 8mm Plastic Chain for Plastic Safety Posts

Manufactured from lightweight polyethylene. Easy to cut to required length. Available in Red/White or Black/Yellow. Simply attach to S hook or connecting hook to link to plastic posts. Supplied in 25mt packs.

Moravia S Hook and connecting Link for Plastic Chains and Plastic Safety Posts

Nylon connecting link or ‘S’ hooks available to connect plastic chain to plastic posts. Available in Red or Black. Pack Qty: 10  

Moravia Plastic Safety Posts

Highly visible, free-standing posts with integrated chain eyes. Posts have a choice of water filled or solid base dependant on application. Maximum recommended distance between posts; 2.5mt. Available in Red/White or Black/Yellow. Plastic chains and hooks are available to purchase separately. Post Dia. 40mmPost Height: 870mm

Moravia Plastic Chain and Post Kits

Highly visible, free-standing posts with integrated chain eyes. Lightweight polyethylene chain. Available in Red/White or Black/Yellow. Kit contains: 6 x Posts with either Square, Triangular and Circular base.10mt of 6mm Chain 10 x Connecting Links 10 x '‘S’' Hooks Post Dia: 40mm Post Height: 870mm

Moravia Heavy Duty Expanding Barrier

Super strong steel construction painted in Red and White incorporating Red reflective strips. Quick and easy to deploy. Fitted with chain hooks to link barriers to form a run. Two sizes available. O/A Height (above ground): 1000mmFoot depth: 500mm

Moravia Black Bull Heavy Duty Steel Pallet Racking Protectors

Steel frame with Yellow powder coated finish with Black chevron for high visibility. Suitable for protection of machine guards, partitions, mezzanine support columns, and concrete columns etc. Rawl Plugs available for securing to the ground - order separately. *400mm Right Angle Profile is 5mm gauge steel, all other sizes are 6mmO/A Width: 160mm  

Moravia Compact System Boom Barrier

Frame is manufactured from steel box section that is galvanised then powder in Red. Boom Arm is manufactured from Aluminium with a White finish featuring Red reflective strips. Quick and easy to install. Unique gas strut assisted operation.-Anti-sit feature boom arm that automatically locks in open and closed positions. Fitted with key operated cylinder lock as standard.-Various sizes available up to a maximum width of 6350mm. Available with either an integrated support arm or a fixed support post. Post Height: 1000mmArms Size: 90 x 60mm

Moravia Black Bull Medium Duty Protection Railing System

Great for use in warehouses, distribution depots, loading bays, storage areas etc. Excellent build quality offering supper strength. Manufactured from steel box section with a Yellow powder coated finish for high visibility. Countersunk bolts secures the rail to the posts. Modular design for quick and easy installation enabling damaged sections to be replaced quickly and extension added at any stage. Order the components to create your railing system. Easy to secure to the ground using rawl plug bolts. (Bolts to be purchased separately, 4 required per guard.) Post Dims: 70W x 70D x 1000H mmRail Dims: 60W x 40D mm

Moravia Black Bull Pallet Racking End Frame Protector

Great for use in warehouses, distribution depots, loading bays, storage areas etc. Excellent build quality offering supper strength. Manufactured from steel box section with a Yellow powder coated finish for high visibility. Width can easily be adjusted to suit your desired length. Easy to install with minimum loss of space. Can be secured to the ground using rawl plug bolts. (Bolts to be purchased separately, 12 required per guard.) Kit Includes: 2 railings and 2 end sections.O/A Dims: 240D x 500H mm

Moravia Pedestrian Safety Crowd Control Plastic Gate Barrier

Ideal for road works, cordoning off excavations, squares, roads etc. Can also be used as a crowd control barrier or to form pedestrian pathways. Blow moulded in a HPDE polyethylene. Moulded in a bright UV resistance orange warning colour with red/white reflective panels that conform to BS EN 12899-1 therefore making this barrier highly visible day and night. Fitted with a non-trip base that can be rotated 360° to facilitate storage. Easily deployed and connected to each other to create a continuous barrier. Suitable for uneven ground. Confirms to BS EN 8442, Chapter 8 – The Traffic Signs Manual, the Red Book 2013 and the Traffic Signs Regulations & General Directions. O/A Dims: 2000W x 50D x 1000H mmWeight: 14kg

Moravia Industrial Trench Cover Ramp SWL: 400kg

Lightweight yet tough blow moulded HD Polyethylene construction in bright Yellow. Features additional high strength steel bars within the mould. Surface has anti slip features and reflective strips for better visibility. Designed with anti trip edges. 100% recyclable. Has 4 integral fixing holes as the trench must be bolted to the ground. Handles enable easy lifting from one location to another. High impact resistant. Conforms to National Grid T/SP/E/42 and the Red Book 2013. Conforms to slip resistance of BS 7976: Part 2. UK Manufactured. O/A Dims: 800W x 1200L x 40H mmSWL: 400kg

Moravia Black Bull Heavy Duty Steel Bollards

Steel construction that is hot dip galvanised then powder coated in Yellow and Black for high visibility. Great for both indoor and outdoor use. Can be either surface mounted using 4 rawl plug bolts to secure to the ground (Bolts to be purchased separately) or sub surface fixing using a 400mm deep ground anchor. Various sizes available dependant on environment. We offer bollards for space restricted areas as well as heavy trafficked areas where Lorries and forklift trucks are operating. EBT589 & EBT590 is equipped with a removable cap which enables the bollard to be filled with concrete when in situ if required.

Moravia Plastic Pallet Racking Protector

Ideal for use in warehouses, distribution centres, manufacturing facilities etc. Manufactured from a high quality HD polyethylene. Fits racking uprights from 60mm to 85mm wide. Quick and easy to install using two velcro straps to secure to the racking upright. No need for drilling and bolting! TUV approved. Conforms to DIN EN 15512. O/A Dims: 143W x 85D x 600H mm

Moravia Black Bull Pallet Racking Protectors with guide rollers

Great for warehousing, distribution centres, manufacturing facilities etc. Robust steel frame with a yellow and black stripe powder coated finish. Incorporate a Polyamid roller. Choice of right angle profile with single roller or U profile with double rollers dependant on application. Easy to install, pre drilled base for ground fixing. Bolts to be purchased separately. O/A Dims: 160W x 400H mmRoller height: 110mm

Moravia Post/Stand for Barrier Tape

Push into the ground for quick and easy deployment of Barrier Tapes. Forge steel pointed tip. O/A Height: 1200mmColour: Red

Moravia Black Bull Collision Protection Bars

Steel construction powder coated Yellow with Black striping for high visibility. Easily and quickly installed. Low profile design enables easy pedestrian access to protected areas. Suitable for internal use only. O/A Height: 86mmCollision Protection Bars - Rawl Plug Bolts are available for securing to the ground.

Moravia Black Bull Shock Absorption Pad

Manufactured from polyurethane with a UV, weather and temperature resistant. The pad enables the rails to deflect up to 10 degrees allows the railing to accept shocks and impacts whilst significantly reducing damage. Increases post height by 40mm. O/A Dims: 200W x 200D x 50H mm Fixing Kit is required to secure to the ground. Kit contains; 8 bolts and resin glue.

Moravia Black Bull Steel Impact Protection Railing System

Manufactured from steel box section with a Yellow powder coated finish. Counter sunk bolts secures the rail to the posts. Modular design for quick and easy installation which means damaged sections can be quickly replaced. Suitable for customised applications, order for your exact requirements and extend at any stage. Easily secures to the ground (fixings not supplied). Post Dims: 100W x 100D x 1000H mmRail Dims: 120W x 80D mm

Moravia Steel Hoop Guards

Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Easily installed, rawl plug bolts can be purchased separately.(4 bolts required per guard). Install to protect pedestrian areas (entrances, exists, door entry gate areas), machinery, to fence off hazardous areas and the segregation of vehicular traffic from pedestrian walkways. etc. O/A Height: 1000mm

Moravia Edge Impact Protection Buffer Profiles

High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Self-adhesive backed Profiles: Can be permanently fixed to smooth dust and grease-free surfaces on corners and edges. Magnetic Profiles: For use on metal surfaces that do not require permanent protection or that require thorough cleaning or painting on a regular basis. Supplied in 1 metre lengths.

Moravia Push-fit Impact Protection Profiles

Simply push onto the areas to be protected; particularly exposed sections can be secured with conventional adhesives. High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Supplied in 1 metre lengths.

Moravia Foam Corner Edges for Impact Protection Profiles

Self-adhesive corners for Impact Protection Profiles. Colour: Black

Moravia Surface Impact Protection Buffer Profiles

High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Self-adhesive backed Profiles: Can be permanently fixed to smooth dust and grease-free surfaces on corners and edges. Magnetic Profiles: For use on metal surfaces that do not require permanent protection or that require thorough cleaning or painting on a regular basis. Supplied in 1 metre lengths.

Moravia Black Bull Impact Protection Barrier System Powder Coated

Hybrid system, steel and plastic construction. Posts are manufactured from steel with a black powder-coated finish. Lateral rails are made from tough-grade polypropylene. Flexible plastic rails allow the barrier system to be designed around obstacles. Heavy-duty design that's quick and easy to install. Suitable for indoor use. Each post is supplied with a patented PU shock absorber pad, allowing the post to deflect to a max. angle of 10° Modular construction for customised applications Anchor set is required to secure posts to the floor, each set will secure 2 posts. Needs to be ordered separately.  Base Plate Dims: 200L x 200W x 10D mmO/A Height: 1040mmO/A Rail Dims: 74H x 52D mmWeight of Post: 10kgWeight of Rail: 4kg

Moravia Black Bull Impact Protection Barrier System Galvanised And Powder Coated

Hybrid system, steel and plastic construction. Posts are manufactured from steel with a black galvanised and powder-coated finish. Lateral rails are made from tough-grade polypropylene. Flexible plastic rails allow the barrier system to be designed around obstacles. Heavy-duty design that's quick and easy to install. Suitable outdoor use. Each post is supplied with a patented PU shock absorber pad, allowing the post to deflect to a max. angle of 10° Modular construction for customised applications Anchor set is required to secure posts to the floor, each set will secure 2 posts. Needs to be ordered separately.  Base Plate Dims: 200L x 200W x 10D mmO/A Height: 1040mmO/A Rail Dims: 74H x 52D mmWeight of Post: 10kgWeight of Rail: 4kg

Moravia EV Charging Point Protection Guard Sub Surface Fix 800H mm

Designed to provide protection to Electric Vehicle charging ports from accidental damage. Manufactured from 60mm high-quality steel, galvanised. Highly visible 75mm retro-reflective rings. Sub-surface fixed - concrete in 300mm. O/A Height: 800mmWeight: 6.1kg

Moravia Black Bull Flex Impact Protection Barrier System Steel Gate

Steel railing gate designed to be used with the Black Bull Hybrid system, steel and plastic construction. Designed for indoor use only. Requires a separate installation post. Manufactured from high-quality steel, powder coated. O/A Dims: 520H x 905W x 30D mmGate Size: 835W x 475H mm

Moravia Compact Swing Barrier

The frame is manufactured from a galvanised steel box section and then powdered in red. Boom Arm is manufactured from Aluminum with a White finish featuring Red reflective strips. Quick and easy to install. Fitted with key-operated triangular cylinder lock as standard. Various sizes available up to a maximum width of 4500mm. Post Height: 1000mmArms Size: 90 x 60mm