Parrs Curved Bike Shelter Powder Coated - 6 or 10 Bikes

Strong steel structure, Galvanised then Powder Coated in Grey, Red, Blue, Green and Black for extra protection against the elements. Roof and back panel clad in 4mm UV PETG. Optional PETG cladding for end panels is available to purchase separately. Adjustable base plates are pre-drilled for securing to a flat concrete surface or equivalent; bolts supplied. To increase bike capacity, an Extension Module can be fitted to the Basic Shelter. Supplied in component form and will require simple self-assembly. Call 01527 585777 for more details. UK Manufactured. O/A Shelter Dims 2100D x 2090H mm Cycle Shelter Capacity:2100mm Width - 6 Bikes4100mm Width - 10 Bikes Bike Rack is not included but can be ordered separately. 

Parrs Curved Bike Shelter - Up to 10 Bikes

Strong steel structure, available with a Galvanised finish preventing rust. Roof and back panel clad in 4mm UV PETG. Optional PETG cladding for end panels is available to purchase separately. Adjustable base plates are pre-drilled for securing to a flat concrete surface or equivalent, bolts supplied. To increase bike capacity, an Extension Module can be fitted to the Basic Shelter. Supplied in component form and will require simple self-assembly. Call 01527 585777 for more details. UK Manufactured O/A Shelter Dims 2100D x 2090H mm Cycle Shelter Capacity: up to 10 Cycles Bike Rack is not included but can be ordered separately. 

Parrs Traditional Bike Shelters - galvanised steel sides

Available in two depths. 1900mm depth is suitable for most bikes, whilst the 2500mm depth is recommended for motorcycles or motor scooters. Open back cycle shelters are suitable for locating close to a wall and offers a cost saving. Framework: Tubular steel frame, with a Blue powder coated finish for weather resistance. Roof: Corrugated sheet steel, galvanised to prevent corrosion caused by the elements. Over hangs the shelter walls at the front to provide protection for bike saddles from all but driving rain. Ends/Optional Back Panels: Corrugated galvanised steel O/A Dims: 2450W x 2100H mm Cycle Shelter Capacity: up to 6 Cycles - Cycle capacity can be increased by adding an Extension Module to the Basic Cycle Shelter. Cycle Racks to be purchased separately  Groundworks; Onsite assembly required, supplied in component form for delivery purposes. Adjustable feet for on-site levelling. Pre-drilled base plated for securing to a flat concrete base or equivalent, parabolts supplied. Call 01527 585777 for details.

Parrs Traditional Bike Shelter - perforated steel sides

Available in two depths - 1900mm depth is suitable for most bikes, whilst the 2500mm depth is recommended for motorcycles or motor scooters. Open back cycle shelters are suitable for locating close to a wall and offers a cost saving. Tubular steel frame, with a Blue powder coated finish for weather resistance. Roof: Corrugated sheet steel, galvanised to prevent corrosion caused by the elements. Over hangs the shelter walls at the front to provide protection for bike saddles from all but driving rain. Ends/Optional Back Panels: Perforated steel sides podwer coated in Light Grey O/A Dims: 2450W x 2100H mm Cycle Shelter Capacity: up to 6 Cycles - Cycle capacity can be increased by adding an Extension Module to the Basic Cycle Shelter. Cycle Racks to be purchased separately Groundworks Onsite assembly required, supplied in component form for delivery purposes. Adjustable feet for on-site levelling. Pre-drilled base plated for securing to a flat concrete base or equivalent, parabolts supplied. Call 01527 585777 for details.

Parrs Bike Vault Extra Plastic Locker for 2 Bikes

Bike Vault is a great choice for schools, colleges, sports centres, warehouses, retail etc. Manufactured from a recycled low density polyethylene. Weatherproof and UV treated therefore will not deteriorate or discolour of time when exposed to the elements. Double security as fitted with two tamper-proof stainless steel tabs that are drilled to accept padlocks. LDPE is very unreactive and resistant to graffiti. A ground anchor can be installed internally to the Bike Vault to accept D locks or chains for additional Bike security. Supplied fully assembled. Each unit is supplied with 4 raw bolts for securing the base to the ground. Black body with a choice of Blue, Red, Light Green, Purple, Pink, Yellow, Orange, Grey, Black and Dark Green Doors O/A Dims: 1000W x 2100L x 1400H mmInternal Dims: 990W x 2090L x 1390H mmCycle Shelter Capacity: 2 Cycles

Parrs Bike Compound Shelter with or without security canopy

Highly popular with schools and colleges as well as in commercial applications. Supplied complete with integral twin level cycle rack. Optional centrally located canopy makes unauthorised access to the Bike Compound more difficult and also provides weather protection for the central area of the structure. Tubular steel frame, powder coated for weather resistance. Colour options: Blue, Green and Light Grey. Roof/Central Security Canopy: UV resistant twin layer polycarbonate. Ends/Back Panels: UV resistant polycarbonate, 360° visibility ensures there are no secluded corners within the structure. Gate: Supplied as standard, hasp fitted to take padlock (not included). O/A Width: 5500mm Cycle Compound Capacity: up to 48 Cycles UK Manufactured Call 01527 585777 for more details.

Parrs Wall Mounted Bike Shelter & Bike Rack - 8 Bikes

Space Saving and Cost Effective Bike Shelter Steel frame, powder coated for weather protection. Colour options: Blue, Green and Grey. Stylish curved Roof design. Impact and UV resistant, opaque polycarbonate. Supplied complete with wall mounted, twin level cycle rack. Onsite assembly required, supplied in component form for delivery purposes. Roof is bolted to a suitable wall and base plates are pre-drilled for surface mounting to a flat level concrete base, fixings not supplied. UK Manufactured Cycle Shelter Capacity: 8 Cycles O/A Cycle Shelter Dims: 3000W x 1900D x 2400H mm

Parrs Aluminium Bike Shelter

Manufactured from a 50mm anodised aluminium tube structure. The roof and end panels are manufactured from anti-UV-treated 10mm cellular polycarbonate panels. Cycle Shelter Capacity: 5 Cycles - Can be increased by adding an Extension Module to the Basic Cycle Shelter. Cycle Racks to be ordered separately. Groundworks: Onsite assembly required, supplied in component form for delivery purposes. Requires concreting in to suitable surface. Call 01527 585777 for more details. O/A Dims:Basic Cycle Shelter: 2580W x 1977D x 2150H mmExtension Shelter: 2580W x 1977D x 2150H mm