Armco Plastic Fishtail Safety End
Ideal for covering up razor-sharp Armco cut ends that otherwise, could cause a safety issue. Manufactured from high-density polyethylene. Fitted with single-point fixing. Fitted with 2 diamond-grade reflectors. Black and Yellow available. Simple and quick to install. Simply fit Armco corrugated rails; 310 x 85mm. O/A Dims: 451W x 205D x 385mm
Ideal for covering up razor-sharp Armco cut ends that otherwise, could cause a safety issue. Manufactured from high-density polyethylene. Fitted with single-point fixing. Fitted with 2 diamond-grade reflectors. Black and Yellow available. Simple and quick to install. Simply fit Armco corrugated rails; 310 x 85mm. O/A Dims: 98D x 338H mm
Black Bull Collision Protection Bars
Steel construction powder coated Yellow with Black striping for high visibility. Easily and quickly installed. Low profile design enables easy pedestrian access to protected areas. Suitable for internal use only. O/A Height: 86mmCollision Protection Bars - Rawl Plug Bolts are available for securing to the ground.
Black Bull Flex Impact Protection Barrier System Steel Gate
Steel railing gate designed to be used with the Black Bull Hybrid system, steel and plastic construction. Designed for indoor use only. Requires a separate installation post. Manufactured from high-quality steel, powder coated. O/A Dims: 520H x 905W x 30D mmGate Size: 835W x 475H mm
Black Bull Heavy Duty Steel Pallet Racking Protectors
Steel frame with Yellow powder coated finish with Black chevron for high visibility. Suitable for protection of machine guards, partitions, mezzanine support columns, and concrete columns etc. Rawl Plugs available for securing to the ground - order separately. *400mm Right Angle Profile is 5mm gauge steel, all other sizes are 6mmO/A Width: 160mm
Black Bull Impact Protection Barrier System Galvanised And Powder Coated
Hybrid system, steel and plastic construction. Posts are manufactured from steel with a black galvanised and powder-coated finish. Lateral rails are made from tough-grade polypropylene. Flexible plastic rails allow the barrier system to be designed around obstacles. Heavy-duty design that's quick and easy to install. Suitable outdoor use. Each post is supplied with a patented PU shock absorber pad, allowing the post to deflect to a max. angle of 10° Modular construction for customised applications Anchor set is required to secure posts to the floor, each set will secure 2 posts. Needs to be ordered separately. Base Plate Dims: 200L x 200W x 10D mmO/A Height: 1040mmO/A Rail Dims: 74H x 52D mmWeight of Post: 10kgWeight of Rail: 4kg
Black Bull Impact Protection Barrier System Powder Coated
Hybrid system, steel and plastic construction. Posts are manufactured from steel with a black powder-coated finish. Lateral rails are made from tough-grade polypropylene. Flexible plastic rails allow the barrier system to be designed around obstacles. Heavy-duty design that's quick and easy to install. Suitable for indoor use. Each post is supplied with a patented PU shock absorber pad, allowing the post to deflect to a max. angle of 10° Modular construction for customised applications Anchor set is required to secure posts to the floor, each set will secure 2 posts. Needs to be ordered separately. Base Plate Dims: 200L x 200W x 10D mmO/A Height: 1040mmO/A Rail Dims: 74H x 52D mmWeight of Post: 10kgWeight of Rail: 4kg
Black Bull Medium Duty Protection Railing System
Great for use in warehouses, distribution depots, loading bays, storage areas etc. Excellent build quality offering supper strength. Manufactured from steel box section with a Yellow powder coated finish for high visibility. Countersunk bolts secures the rail to the posts. Modular design for quick and easy installation enabling damaged sections to be replaced quickly and extension added at any stage. Order the components to create your railing system. Easy to secure to the ground using rawl plug bolts. (Bolts to be purchased separately, 4 required per guard.) Post Dims: 70W x 70D x 1000H mmRail Dims: 60W x 40D mm
Black Bull Pallet Racking End Frame Protector
Great for use in warehouses, distribution depots, loading bays, storage areas etc. Excellent build quality offering supper strength. Manufactured from steel box section with a Yellow powder coated finish for high visibility. Width can easily be adjusted to suit your desired length. Easy to install with minimum loss of space. Can be secured to the ground using rawl plug bolts. (Bolts to be purchased separately, 12 required per guard.) Kit Includes: 2 railings and 2 end sections.O/A Dims: 240D x 500H mm
Black Bull Pallet Racking Protectors with guide rollers
Great for warehousing, distribution centres, manufacturing facilities etc. Robust steel frame with a yellow and black stripe powder coated finish. Incorporate a Polyamid roller. Choice of right angle profile with single roller or U profile with double rollers dependant on application. Easy to install, pre drilled base for ground fixing. Bolts to be purchased separately. O/A Dims: 160W x 400H mmRoller height: 110mm
Black Bull Shock Absorption Pad
Manufactured from polyurethane with a UV, weather and temperature resistant. The pad enables the rails to deflect up to 10 degrees allows the railing to accept shocks and impacts whilst significantly reducing damage. Increases post height by 40mm. O/A Dims: 200W x 200D x 50H mm Fixing Kit is required to secure to the ground. Kit contains; 8 bolts and resin glue.
Black Bull Steel Corner Protection Guards
Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Protects stock, traffic routes and work areas, separates different traffic routes (e.g. stacker lanes in warehouses and pedestrian traffic), machinery, supports, columns, shelving, loading ramps and equipment. Easily installed, rawl plug bolts can be purchased separately: Protection Guards Rawl Plug Bolts (12 bolts required per guard). Shock Absorption Pad is available to add flexibility to your Protection Guards.
Black Bull Steel Hoop Protection Guards
Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Protects stock, traffic routes and work areas, separates different traffic routes (e.g. stacker lanes in warehouses and pedestrian traffic), machinery, supports, columns, shelving, loading ramps and equipment. Easily installed, rawl plug bolts can be purchased separately: Protection Guards Rawl Plug Bolts (8 bolts required per guard). Shock Absorption Pad is available to add flexibility to your Protection Guards.
Black Bull Steel Impact Protection Railing System
Manufactured from steel box section with a Yellow powder coated finish. Counter sunk bolts secures the rail to the posts. Modular design for quick and easy installation which means damaged sections can be quickly replaced. Suitable for customised applications, order for your exact requirements and extend at any stage. Easily secures to the ground (fixings not supplied). Post Dims: 100W x 100D x 1000H mmRail Dims: 120W x 80D mm
Black Bull Warehouse Protection Guards with Steel Infill
Great for indoor use in warehouses, distribution depots, storage areas etc. Used to protect stock, machinery, columns, shelving, loading ramps and equipment. Also used to create traffic routes and separate working areas.-Steel construction with a powder coated finish in Yellow and Black for high visibility. Easy to install; simply use raw plug bolts to secure to the ground. (Bolts to be purchased separately, 8 required per guard.) Tube Dia.: 76mm Tube Thickness: 3mm
Manufactured from low-density polyethene. UV stabilized for indoor or outdoor use. High visibility. Assembles in seconds; no fixings required simply fits over the existing bollard Secure fit with Self Adhesive foam strip. Can be cut down to suit shorter heights. Can accommodate bollards up to 183mm. O/A Dims: 183mm Dia. x 1200H mmThickness: 4.5mmColour: Yellow and Black. (2 x black strips 180mm high made from heavy-duty black vinyl)
Manufactured from linear low-density polyethylene. UV stabilized for indoor or outdoor use. High visibility. Assembles in seconds; no fixings required simply fits over base plate then velcro strap around. In the event of a collision air pressure is released to cushion the blow. Double stack for extra height protection. 4 sections supplied to fit columns 400mm square column. O/A Dims: 1080mm H x 200 x 200mm WDepth: 200mm
Manufactured from linear low-density polyethylene. UV stabilized for indoor or outdoor use. High visibility.-Assembles in seconds; no fixings required simply fits over base plate then velcro strap around the unit. In the event of a collision air pressure is released to cushion the blow. Double stack for extra height protection. Quantity: 2 infill'sO/A Height: 1000mm
Edge Impact Protection Buffer Profiles
High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Self-adhesive backed Profiles: Can be permanently fixed to smooth dust and grease-free surfaces on corners and edges. Magnetic Profiles: For use on metal surfaces that do not require permanent protection or that require thorough cleaning or painting on a regular basis. Supplied in 1 metre lengths.
EV Charging Point Protection Guard Sub Surface Fix 800H mm
Designed to provide protection to Electric Vehicle charging ports from accidental damage. Manufactured from 60mm high-quality steel, galvanised. Highly visible 75mm retro-reflective rings. Sub-surface fixed - concrete in 300mm. O/A Height: 800mmWeight: 6.1kg
EV Charging Point Protection Guard Surface Fixed 500H mm
Designed to provide protection to Electic Vehicle charging ports from accidental damage. Manufactured from 60mm high quality steel, galvanised. Highly visible 75mm retro-reflective rings. Pre-drilled based, designed for surface mounting. 12 x 100mm rawl bolts & 12 x 120mm through bolt anchors required to fix to the surface, to be purchased separately. O/A Height: 500mmBase plate size: 160L x 70W mmWeight: 5.9kg
Foam Corner Edges for Impact Protection Profiles
Self-adhesive corners for Impact Protection Profiles. Colour: Black
Fully Welded Steel Warehouse Barrier
All welded steel construction with a high visibility Yellow powder coated finish. Available as an open barrier or with a mesh infill. Pre drilled base plate for ground fixing, bolts supplied. UK Manufactured.
Infill to Suit Column Protector 400mm Square
Manufactured from linear low-density polyethylene. UV stabilized for indoor or outdoor use. High visibility. O/A Dims: 1080H x 250W x 200D mmWeight: 4.5kg
Plastic Pallet Racking Protector
Ideal for use in warehouses, distribution centres, manufacturing facilities etc. Manufactured from a high quality HD polyethylene. Fits racking uprights from 60mm to 85mm wide. Quick and easy to install using two velcro straps to secure to the racking upright. No need for drilling and bolting! TUV approved. Conforms to DIN EN 15512. O/A Dims: 143W x 85D x 600H mm
Fully welded construction for floor mounting, fixings included. Ideal for use in a variety of manufacturing areas, warehouse facilities and general workplace environments. Powder coated in Yellow or Black and Yellow.
Push-fit Impact Protection Profiles
Simply push onto the areas to be protected; particularly exposed sections can be secured with conventional adhesives. High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Supplied in 1 metre lengths.
The handy tool to help you install Rack Armour upright protectors Available in 2 size options depending on your Rack Armour Provides quick and easy installation Small - Medium: 70-100mm Large to X-Large: 101-120mm
Rack Armour Upright Protector Dark Yellow
Manufactured from ballistics grade plastic which deflects under impact. Provides a proven 80% reduction in damage levels. Tight Fit - won't come off as easily as other protectors. Quick and easy installation - no fixings required. High visibility colours clearly gives safe working boundaries for MHE drivers. Installation tool available. To be purchased separately. Tested to meet and exceed European and Australian safety standards, including EN 15512 and AS4100. 600mm High. O/A Dims:Small - 70-87mm upright widthMedium - 88-100mm upright widthLarge - 101-110mm upright widthExtra Large - 111-120 upright width
Rack Armour Upright Protector Light Yellow
Manufactured from ballistics grade plastic which deflects under impact. Provides a proven 80% reduction in damage levels. Tight Fit - won't come off as easily as other protectors. Quick and easy installation - no fixings required. High visibility colours clearly gives safe working boundaries for MHE drivers. Installation tool available. To be purchased separately. Tested to meet and exceed European and Australian safety standards, including EN 15512 and AS4100. 600mm High. O/A Dims:Small - 70-87mm upright widthMedium - 88-100mm upright widthLarge - 101-110mm upright widthExtra Large - 111-120 upright width
Regular Plastic Column Protectors
Manufactured from linear low-density polyethylene. UV stabilized for indoor or outdoor use. High visibility. Assembles in seconds; no fixings required simply fits over base plate then velcro strap around. In the event of a collision air pressure is released to cushion the blow. Double stack for extra height protection. Fits a range of different shapes and sizes of column with a diameter between 150mm to 300mm. O/A Dims: 1100mm H x 600mm Dia.Wall thickness: 6.4mm
Slimline Plastic Column Protectors
Suitable for areas with limited space, including mezzanine floors. Manufactured from linear low-density polyethene. UV stabilised for indoor or outdoor use. High visibility. Assembles in seconds; no fixings required, simply fits over base plate, then velcro strap around. In the event of a collision, air pressure is released to cushion the blow. Double stack for extra height protection. Fits columns with a diameter of 110mm or 150mm. O/A Dims: 1000mm H x 400 (widest point) Dia.Weight: 10kg
Steel construction powder coated Yellow with Black striping for high visibility. If installing outside we recommend the hot dip galvanised/powder coated finish, for additional protection against corrosion. Easily installed, rawl plug bolts can be purchased separately.(4 bolts required per guard). Install to protect pedestrian areas (entrances, exists, door entry gate areas), machinery, to fence off hazardous areas and the segregation of vehicular traffic from pedestrian walkways. etc. O/A Height: 1000mm
Steel Right Angle Pallet Racking Protector
Ideal for use in logistic depots, warehouses, factories, manufacturing sites, storerooms and more. Manufactured from high quality steel with Yellow and Black powder coated finish. Use with PU absorption pad to absorb impact and protect floors from damage. Absorbent pad is also great to use with uneven floors to keep protector straight. Yields up to 45mm. Yield angle 6.5°. Quick and easy to install (using anchor bolt fixing kit (to be ordered separately). O/A Dims: 160 x 160 x 400H mm Weight: 8kg
Surface Impact Protection Buffer Profiles
High quality moulded sections, easily cut to length with a sharp knife or fine saw blade. Made from flexible age resistant polyurethane foam. UV resistant Yellow/Black colours according to DIN 4844. Temperature resistant from -40°C to +90°C. Self-adhesive backed Profiles: Can be permanently fixed to smooth dust and grease-free surfaces on corners and edges. Magnetic Profiles: For use on metal surfaces that do not require permanent protection or that require thorough cleaning or painting on a regular basis. Supplied in 1 metre lengths.
Tubular Steel Warehouse Barriers
All welded tubular steel construction with a high visibility Yellow powder coated finish. Available as a long, short and corner barrier Pre drilled base plate for ground fixing, bolts supplied. UK Manufactured. O/A Height: 940mm
Manufactured from highly flexible and tough linear low-density polyethylene. UV stabilized for indoor or outdoor use. High visibility. Assembles in seconds; no fixings required. In the event of a collision air pressure is released to cushion the blow. 4 sections supplied with plastic cross members that can be cut to fit sizes from 200mm to 700mm. O/A Dims per section: 700L x 1000H mmWeight: 4kg per section